We recently decided our CI server needed an overhaul. I really enjoyed Integrity as a build server, but after trying out Hudson it’s hard to say I want to go back. Hudson has several huge advantages:
Here’s the details of what I went through to get our new CI server up and running. Be warned, these are probably specific to our projects and needs, but the general process can definitely help anyone who’s looking to get started.
We started with a fresh Ubuntu 9.04 LTS install. First up was a basic iptables setup, all the commands you need are on this SliceHost article.
Next up we needed to install Hudson. Follow the instructions here: http://hudson-ci.org/debian/
The nice part about this install (instead of custom compiling it) is that it comes with an init script that is really handy to stop/start the server. There’s more tips on installing here.
If apt-get starts whining, just run
sudo apt-get install -f. The hudson package should install the Java dependencies you’ll need for now.
Let’s also install some other basics we’ll need eventually. You may disagree with my choices here, but too bad, I’m the one maintaining CI:
sudo apt-get install zsh vim git-core build-essential postfix ack-grep curl chsh /usr/bin/zsh
The postfix install will prompt you for your server’s host name, we’ll want it eventually for emails. If you’re confused, check this article out.
By now you should be able to visit http://YOUR_SERVER_IP:8080 and Hudson should be alive and kicking.
That’s annoying though, we want to serve requests on port 80. Supposedly doing this with Hudson itself is a bad idea, since it would need to run as root. Apache does a better job, and this tutorial goes over the reasons why.
Here’s what I had to do to get this working:
sudo apt-get install apache2 libapache2-mod-proxy-html sudo a2enmod proxy sudo a2enmod proxy_http sudo a2dissite 000-default
That will install apache2, get the proxy mod enabled to forward requests along to hudson from the root domain, and disable the default site. Next step is editing
/etc/apache2/apache2.conf and adding the following directive to the bottom:
# where your server lives! ServerName ci.thoughtbot.com
Next up we’ll need to actually make a virtual host for apache to serve (thanks to this StackOverflow question for the right incantations). Create
/etc/apache2/sites-available/hudson with the following:
<VirtualHost *:80> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ProxyRequests Off # Local reverse proxy authorization override # Most unix distribution deny proxy by default # (ie /etc/apache2/mods-enabled/proxy.conf in Ubuntu) <Proxy http://localhost:8080/*> Order deny,allow Allow from all </Proxy> </VirtualHost>
And the final touch to enable hudson and fire up apache:
sudo a2ensite hudson sudo /etc/init.d/apache2 restart
Port 80 is much better. Now to continue with the configuration! We’re just using a standard security setup with one user. The process is a bit confusing, you have to enable authorization, then go out and sign up to set the password. After that, make sure you set the anonymous user permissions so they can see jobs on the home page.
If you’re an idiot like me and locked yourself out while doing this, disabling security is pretty simple.
As for plugins, we chose so far:
After installing the plugins and restarting, I disabled a bunch we didn’t need too, like Maven, CVS, etc. I would also check the “Prevent CSRF” button, that’s just a ridiculous option not to have on.
Let’s get mysql and postgres installed first.
sudo apt-get install mysql-server mysql-client libmysqlclient15-dev sudo apt-get install postgresql postgresql-client postgresql-contrib
Redis is up next. We’re running the release candidate of 2.0, which is a bit of a pain to set up so far since
make install was removed. I came up with an upstart scriptto run it instead.
sudo adduser redis sudo su - redis curl -O http://redis.googlecode.com/files/redis-2.0.0-rc1.tar.gz tar zxvf redis-2.0.0-rc1.tar.gz cd redis-2.0.0-rc1.tar.gz make logout sudo bash -c "curl http://gist.github.com/raw/444033/9784f426402d5bece09894fcc6f98a33db5f5d15/redis.upstart > /etc/event.d/redis" sudo start redis
Now that RVM exists, we can completely isolate projects from each other using gemsets. First we’re going to need even more system packages to deal with ruby and the other gems we’ll be installing eventually (nokogiri, paperclip, etc):
sudo apt-get install bison openssl libreadline5 libreadline-dev zlib1g zlib1g-dev libssl-dev libsqlite3-0 libsqlite3-dev sqlite3 libreadline5-dev libreadline6-dev libxml2-dev subversion autoconf libxslt-dev imagemagick
Jump in as the hudson user now and set up RVM:
sudo su - hudson bash < <( curl http://rvm.beginrescueend.com/releases/rvm-install-head ) echo "[[ -s $HOME/.rvm/scripts/rvm ]] && source $HOME/.rvm/scripts/rvm" > .profile echo "---\ngem: --no-ri --no-rdoc" > .gemrc
Install the rubies you need now. Our starting lineup:
rvm install 1.8.6 rvm install 1.8.7 rvm install ree rvm install jruby
We’ll need to get the hudson user set up with git and github too. Make sure to upload your public key
~/.ssh/id_rsa.pub to github so you can start cloning repos.
ssh-keygen -t rsa git config --global user.email "email@example.com" git config --global user.name "hudson"
For each app, create the gemset, databases, and get the gems you need. Bundler would make this easier, but we’re not on it for all projects yet.
sudo su - hudson rvm gemset create hoptoad rvm gemset use hoptoad mysql -u root > create database hoptoad_development; > create database hoptoad_test; gem install mysql nokogiri json
Make a new Hudson job, check from SCM periodically, enable the post build notifications you want. Here’s the build script we’re using for hoptoad so far:
bash -l -c "rvm use 1.8.6-p287 && rvm gemset use hoptoad && rake db:migrate db:test:prepare default"
Debug, rinse, and repeat until it’s green.
RVM made this process a lot easier, I used to have to compile multiple versions of Ruby on my own and it was just a pain to manage. Gemsets are a killer feature too, and it’s easy to move them around to another Ruby version with the copy command:
rvm gemset copy 1.8.6@factory_girl 1.8.7@factory_girl
Overall the process was pretty smooth, and like any CI solution this took a while to set up and has its share of annoyances:
I hope these guidelines help those new to continuous integration with Hudson or otherwise. Of course, there’s plenty of other options in the Ruby-verse, but hopefully you won’t pass up what Hudson has to offer.